MEWPS01 - 1 DAY TRAINING

For persons requiring the use of MEWPS during their work. Under Provision and Use of Work Equipment Regulation (PURE 86) this requires formal training and certification.

This course provides basic training with the required health and safety.

The trainee will be able to operate the truck to a standard but will require supervision until he/she gains confidence and skill.

Learning Objectives

Pre operational checks
Fluid levels. Tyres and wheels. Brakes. Instruments. Horn. Flashing beacon. Hydraulic. Safety devices. Steering. Battery levels. Check emergency lowering. Check safety Harness. Check outriggers if fitted

Task 1
Check ground conditions. Check overhead obstructions / power lines. Check Working area and place appropriate warning signs. ensure route and working area is clear.

Task 2
Travel and set up machine in preparation to commence work. Elevate platform to pre-determined height and location.

Task 3
Travel and set up machine in confined space. Elevate platform to maximum height. Use all necessary controls to slew and manoeuvre into position, simulate task i.e., repair light fitting etc. Lower and make ready for travel and move off.

End of shift
Park safely remove ignition key and re-fuel or put on charge.

Constraints

	Hire trucks on site by 9am on the day of the training with the trucks manual.
	8 Trainees per day - 4 trainees AM and 4 trainees PM
	Classroom for the duration of the course
	Personal Protective equipment
	Overalls
	Boots
	Gloves (Handling)
	Harness

Back to the top of page